Another Crazy Carls original product! For those who want the custom look, a dual plate allows twin intake horns. Proudly made in the USA from aircraft quality billet aluminum and pressure tested to over 200psi, The Tunnel Ram is able to withstand...
Another Crazy Carls original product! Say goodbye to those old rusty schabby stock bolts!! Beautiful 304 Stainless Steel hardware kit for installing one of our Tunnel Ram intakes and/or high flow air horns. This kit contains all 14 bolts needed...
Promotes max flow to the head at both ends. Comes with dipstick mount and 2 NPT bungs. Made from heavy 409SS tubing and 304 Stainless flanges with 304SS bungs. Use with our dual intake plate for 94-98 12v.
Polished 304 Stainless Steel intake horn for all (94-07) Dodge Cummins trucks it works with VP or P7100 and even dual CP3 configurations and is a great compliment to our Tunnel Ram high flow intake plates. 100% Made in USA! This intake is also...
Another Crazy Carls original product! The Tunnel Ram 12V is a new patented intake for the 91-98 Dodge Cummins 12V diesel engine. Proudly made in the USA from aircraft quality billet aluminum and pressure tested to over 200psi.
Designed for optimum air flow to all cylinders
Our mandrel bend Intake Horns improve on the stock design providing optimum air flow to all cylinders
This is a parts kit for building your own custom air horn and includes all the basic parts needed: 304SS Base plate, 409SS U-bend, 1/4 thick mild steel dipstick tab and 2 304SS bungs. *You will need to cut/weld this kit to fit your application.
this is our 3.5" intercooler piping kit for 94-02 Dodge Cummins.
Grid Heater Delete Block for Dodge Cummins Trucks. Use to remove/replace the stock grid heater during warmer weather. This allows maximum airflow to pass through.
This is our 1/2" thick mild steel intake flange for building air horns. It is Laser cut and drilled. Center hole is 3-1/8". Easy to dress/weld. A great starting point for your custom air horn!
Weld Bung 1/8 NPT steel
Intake horn flange, 304 Stainless Steel, 1/2" thick, 3-1/8" hole, laser cut, and ground finish. A great starting point for your DIY custom intake horn! This is the same flange we use on our own SS horns.