Home > Exhaust >

Stainless Diesel Exhaust Manifold T4 24V

Stainless Diesel Exhaust Manifold T4 24V


 
Alternative Views:


Our Price: $700.00



Availability:: Usually Ships in 24 to 48 Hours
Product Code: SDMANT424V


Add Hardware*:


Add Gaskets?*:


Cerakote Option*:


Qty:  
Description
 

This will be the LAST Manifold you'll ever purchase --- with a ZERO percent failure rate!!!
Comes with Stainless Steel Bolts or you can upgrade to Studs (see options)

Stainless Diesel exhaust manifolds ARE MADE IN THE USA !!!! They come with 2 ports drilled and tapped for EGT & Drive. Our Stainless Exhaust manifolds are made with shell molding its a Super Smooth inside and out casting technology that has superior flow over and above the old type 60 grit sand paper like looking and filling casting that all the Cast Iron ex manifolds are made from. Back-to-back testing with our Stainless Manifold shows a 20hp increase against competitors 3 pc. cast iron manifold!


Makes larger chargers more Driveable. Improves Horsepower and Widens Powerband . Excellent Fit & Finish . Ships With Stainless Steel mounting Hardware and Brass 1/8 & 1/4 NPT Plugs . Increased Economy When Installed W/Same Mods . Our Stainless Diesel 2nd gen 24v &12v Cummins exhaust manifold was cast with a Stainless steel moon metal mix made for Extreme High Heat cycling. The manifolds are built with 3/4+ inch thick center section with room for Extra porting . Thick wall castings for Great Thermal control . The most superior thermal energy retention for Faster spool up Accelerations . The Super Smooth inside runner sizing is 1.650 inches all the way to the center outlet for Extreme high flow. Proven smooth single piece cast design , has no steps that block flow in the middle like the old style 2 & 3 piece iron manifolds. The old style 2 & 3 piece iron manifolds are built with steps in the runners causing Inefficient Turbulent Air Flow Inside. Ever wonder why your stock one piece spools better?