Home > Engine Parts & Fasteners
Choose a sub category:
Billet parts Cam Shafts, Pushrods, Tappets Clutches
Coolant Bypass Delivery Valves Flexplates
Freeze Plugs Gaskets Gears
Governor Springs Harmonic Balancer Head Studs
Killer Dowel Pin Steering Tappet Covers
Throttle Linkages & Cables Timing Covers Valve Covers
Valve Springs
Sort By:
1 2 3 ... 5
Crazy Carls 24 Valve P-Pump APPS Kit Crazy Carls 24 Valve P-Pump APPS Kit

Brackets, mount and linkage needed to use factory 24-Valve APPS throttle assembly on P-Pump swap. Retains the factory 24v cables and bellcrank/APPS assembly, so no need for cable cutting or mix-n-match to prevent shifting and throttle issues.

Our Price: $169.00
Crazy Carls 89-93 Replacement Throttle Linkage Kit Crazy Carls 89-93 Replacement Throttle Linkage Kit

This is our 1st gen 89-93 replacement throttle linkage kit. It come with 2 new heim joints, stainless shaft and stainless mounting hardware.

Fix that sloppy stock linkage before it leaves you stranded!

List Price: $50.00
Our Price: $35.00
Crazy Carls Exhaust Manifold Studs and Nuts Crazy Carls Exhaust Manifold Studs and Nuts

Use these studs instead of bolts on your aftermarket exhaust manifold. We paired 12 steel alloy studs with 12 stainless steel nuts to prevent galling.

List Price: $55.00
Our Price: $48.00
P7100 Injection Pump Seal Ring P7100 Injection Pump Seal Ring

Front seal/o-ring for the P7100 injection pump found on 94-98 Dodge 5.9L 12 Valve Cummins trucks.

Our Price: $21.00
P7100 Gear Case Aftermarket P7100 Gear Case Aftermarket

This is the gear case needed for a Cummins with a P7100 injection pump. Fits Dodge 12 and 24 valve Cummins engines up to 2002.

Our Price: $299.00
Cummins Heavy Duty 103LB 24V Hamilton Valve Springs Cummins Heavy Duty 103LB 24V Hamilton Valve Springs

Good for up to 4500 RPM! Heavy Duty Valve Springs 1998.5-2011+ 24 Valve Cummins - 103 pressure Features include: Beehive design to reduce mass on the top part of the spring

List Price: $399.00
Our Price: $325.00
24v competition springs 135# Cummins 24v competition springs 135# Cummins

24 Valve Competition Springs 135 LB seat pressure for use in competition engines with steel cams

List Price: $499.00
Our Price: $499.00
ARP 425 Head Studs 24V ARP 425 Head Studs 24V

Use for 45+ PSI. Rated at 220,000 psi tensile strength. Ample clamping force prevents cylinder heads from lifting.

List Price: $601.64
Our Price: $535.00
ARP 89-98 Dodge 5.9L 12 Valve Cummins 12MM Cylinder Head Stud Kit ARP 89-98 Dodge 5.9L 12 Valve Cummins 12MM Cylinder Head Stud Kit

IN STOCK: Use for 80+ PSI. Rated at 220,000 psi tensile strength. Ample clamping force prevents cylinder heads from lifting. ARP 247-4203

List Price: $610.00
Our Price: $530.00
ARP 625+ Head Studs Custom Age ARP 625+ Head Studs Custom Age

LIMITED SUPPLY in Stock NOW - These are the GOOD ONES! Dodge Ram 2500 1998-2013 24 Valve Diesel 5.9 Cummins | Custom H 625 Super Alloy High Tensil Strength 260, 000 PsiAmple clamping force prevents cylinder heads from lifting.

List Price: $2,350.43
Our Price: $1,450.00
Sale Price: $1,363.23
ARP 625+ Head Studs Custom Age for 12V ARP 625+ Head Studs Custom Age for 12V

1 left in Stock! More on order. These are the GOOD ONES! Dodge Ram 2500 12V Valve Diesel 5.9 Cummins | Custom H 625 Super Alloy High Tensil Strength 260, 000 Psi. Ample clamping force prevents cylinder heads from lifting.

List Price: $1,622.62
Our Price: $1,400.00
Head Gasket Set 98-02 24V Standard Head Gasket Set 98-02 24V Standard

Complete Head Gasket Set for 2nd Gen Dodge Cummins trucks 98-02, standard thickness

Our Price: $215.00
Crazy Carls Tunnel Ram 24-P 98-02 intake P7100 Crazy Carls Tunnel Ram 24-P 98-02 intake P7100

BACK IN STOCK! Another Crazy Carl's original product! Now made out of one piece of billet aluminum. The Tunnel Ram 24-P is a patented intake for the 98-02 Dodge Cummins 24V diesel engine WITH A P7100 CONVERSION. Proudly made in the USA from aircraft quality billet aluminum and pressure tested to over 200 psi.

Our Price: $349.00
Cummins 89-02 Dodge 5.9L Cummins Diesel Oil Pan Gasket Cummins 89-02 Dodge 5.9L Cummins Diesel Oil Pan Gasket

89-02 Dodge 5.9L Cummins Diesel Oil Pan Gasket

Our Price: $35.00
5.9L Diesel Tappet Cover Gasket 89-02 5.9L Diesel Tappet Cover Gasket 89-02

Tappet Cover Gasket for 89-02 Dodge Cummins.

Our Price: $35.00
Fuel Shutoff Solenoid 12V Fuel Shutoff Solenoid 12V

The P7100 pump on the '94-'98 Dodge/Cummins Turbo Diesel 12-valve engine utilizes a 12-volt electric fuel shutoff solenoid that, over time, may stop functioning.  Don't let it leave you stranded - get a replacement solenoid to keep on hand in case you ever run into trouble.

Our Price: $115.00
98.5-2007 5.9L Cummins Diesel Modified 20 Over Head Gasket 98.5-2007 5.9L Cummins Diesel Modified 20 Over Head Gasket

.020 Over Modified Marine Head Gasket 98.5-07 Dodge 24 Valve 5.9L Cummins Diesel

List Price: $350.00
Our Price: $300.00
MAHLE Engine Kit Gasket Set Standard Thickness - 1998.5-2002 MAHLE Engine Kit Gasket Set Standard Thickness - 1998.5-2002

Backordered - MAHLE Engine Kit Gasket Set Standard Thickness - 1998.5-2002
Dodge Cummins 5.9L MAHLE supplies original Engine Kit Gasket Set for 5.9L Dodge Cummins engines.

Our Price: $300.00
Interstate McBee98.5-02 Dodge 5.9L 24 Valve Cummins Diesel Aftermarket Head Gasket Set Interstate McBee98.5-02 Dodge 5.9L 24 Valve Cummins Diesel Aftermarket Head Gasket Set

This is a complete UPPER cylinder head gasket set for the 24V Cummins engine. 98.5-02

Our Price: $199.00
Interstate McBee 98.5-02 Dodge 5.9L 24 Valve Cummins Aftermarket Lower Engine Gasket Kit Interstate McBee 98.5-02 Dodge 5.9L 24 Valve Cummins Aftermarket Lower Engine Gasket Kit

MAHLE Engine Kit Gasket Set Standard Thickness - 1998.5-2002
Dodge Cummins 5.9L MAHLE supplies original Engine Kit Gasket Set for 5.9L Dodge Cummins engines.

Our Price: $195.00
Cummins OEM 98.5-02 Dodge 5.9L 24 Valve Cummins Lower Engine Gasket Kit Standard Thickness Cummins OEM 98.5-02 Dodge 5.9L 24 Valve Cummins Lower Engine Gasket Kit Standard Thickness

Cummins Lower End Engine Kit Gasket Set Standard Thickness - 1998.5-2002

Our Price: $440.00
Adjustable Timing Gear Adjustable Timing Gear

More expected in early June. Cummins 5.9 Adjustable Timing P7100 Injection Pump Gear. Adjustable gear allows for 40 degrees of timing adjustment in 2 degree increments. Comes with the key required to key the hub to the pump shaft. *NO CORE REQUIRED!

Our Price: $349.00
Power Driven Diesel Adjustable P7100 Timing Gear Power Driven Diesel Adjustable P7100 Timing Gear

Cummins 5.9 Adjustable Timing P7100 Injection Pump Gear by Power Driven Diesel.

Our Price: $395.00
P7100 Drive Gear P7100 Drive Gear

Brand New P7100 Ppump Drive Gear Dont risk using a worn or cracked used pump gear that cant keep accurate timing! These gears are not easy to come by, but we try to keep a couple in stock @ the best price on the net! *If you need to order more...

Our Price: $155.00
Cummins P7100 Drive Gear Cummins P7100 Drive Gear

Genuine Cummins brand Ppump Drive Gear

List Price: $374.25
Our Price: $345.00
Keating 12V Billet Timing Cover Keating 12V Billet Timing Cover

12 Valve Billet Timing Front Cover 5.9L for94 and up Cummins 12V engines by Keating Machine

Our Price: $419.95
24 Valve Billet Timing Front Cover fits Cummins 5.9L & 6.7L Common Rail 2003 & Up 24 Valve Billet Timing Front Cover fits Cummins 5.9L & 6.7L Common Rail 2003 & Up

Fits 2003 & up 24 Valve  5.9L & 6.7L Cummins common rail engines with stock gear housing. Can use factory fan with stock dampener and belt. Includes Stainless Steel hardware. Allows installation of aftermarket mechanical fuel supply pump.

Our Price: $425.00
12 Valve BilletTiming Cover, 5.9L fits Cummins Black Pocketed 12 Valve BilletTiming Cover, 5.9L fits Cummins Black Pocketed

Black Pocketed 12 Valve Billet Timing Front Cover 5.9L for 94 and up Cummins 12V engines by Keating Machine

Our Price: $495.00
12V Billet Timing Front Cover 5.9L Pocketed fits Cummins 12V Billet Timing Front Cover 5.9L Pocketed fits Cummins

Pocketed 12 Valve Billet Timing Front Cover 5.9L for 94 and up Cummins 12V engines by Keating Machine

Our Price: $439.95
12 Valve Billet Front Timing Cover for Removable Gear 12 Valve Billet Front Timing Cover for Removable Gear

NOT FOR STREET TRUCKS. Fits Cummins billet front timing cover for p-pump and Sigma pump
converted engines. Allows pump gear to be removed with out removing front cover.

Our Price: $529.95
   
 
1 2 3 ... 5
WARNING: These products can expose you to chemicals including carbon black, silica - crystalline, formaldehyde, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.