This is a turbo drain gasket
This is the gasket that goes between the head and intake plate. The original is a common source of leaks and should always be changed if the plate is removed. Long gasket ONLY. This does NOT include the square gasket.
This is the square intake gasket that goes under the air horn and grid heater. Two are usually used per truck. We also have the full 3pc set if you need all of them.
This is a T6 turbo gasket. It is an open type made of stainless steel.
divided T3 Turbo Gasket stainless steel
Aftermarket valve cover gasket You will need 6 to replace All Valve Cover Gaskets.
Front seal/o-ring for the P7100 injection pump found on 94-98 Dodge 5.9L 12 Valve Cummins trucks.
Intake Gasket kit. This set includes the long base gasket and both square upper gaskets for the grid and horn.
89-02 Dodge 5.9L Cummins Diesel Oil Pan Gasket
Set of six aftermarket valve cover gasket for 1989-1998 Dodge 5.9L 12 Valve Cummins
Tappet Cover Gasket for 89-02 Dodge Cummins.
one set of all 6 metal exhaust manifold gaskets for 24V Cummins
One set of all 6 metal exhaust manifold gaskets
This is a full gasket set for your Cummins timing case from 94-02. Includes: *Timing Case to Block gasket *Timing Case to cover gasket *crank seal with repair sleeve.
98.5-02 Dodge 5.9L 24 Valve Cummins Brand Valve Cover Gasket
Crank Shaft Seal, including sleeve you install to cover the crank shaft, allowing for a tight seal. Does not include installation tool
Complete Head Gasket Set for 2nd Gen Dodge Cummins trucks 98-02, standard thickness