*head studs and transmission/clutch upgrades are recommended to match available power range.
Includes all piping and parts needed* (see list). This kit will come with
a new 475 96/1.32 T6 turbo with
covers and upgraded internals and billet wheel made for us by Forced Inductions with a 6-month
warranty. This turbo pairs ideally with a 362 or 363 or 364 S300 SX or SXE style turbo, and with proper fueling is rated from stock up to 750hp. *NOTE: Requires a T3 24V Exhaust Manifold. Stock is fine if in good shape. If you do not have one, see selections above starting at $400. (Yes, this kit will fit with a T3 2nd Gen Steed Manifold. We sell those separately under Exhausts. See availability.)
Kit includes:Heavy duty hot pipe (regular hot pipe coated in high heat ceramic paint)
1-piece metal cold pipe,
Intercooler pipe,
Full 5" intake pipe,
4" or 5"* down pipe,
Stainless top and bottom turbo oil feed lines,
Top and bottom turbo oil drain lines,
Billet block fitting,
Bottom turbo support bracket,
Top turbo spacer plate,
Quality name-brand large high flow filter,
SS Vband clamps,
SS T-bar clamps,
Quality powder-coating of applicable PIPING is included - choose from more than a dozen colors
Gaskets, hardware and basic instructions.
We offer both 4 inch and 5 inch downpipes. As you'd expect, 5 inch downpipes are a tight fit, due to variations
in trucks you may need need to modify your firewall slightly.
We
powder coat in-house and prefer all kits to be powder-coated for the
longevity of the product. We will send kits bare but encourage you to
get them coated. There is no cost difference for getting your piping
uncoated.
NOTE: S300 must be machined to accept factory elbow.
***These kits are custom made to order and may take a week or so to ship.*****