These are the lines needed to swap a Ppump onto a 98.5-02 Cummins VP 24v engine.
The lines are available in .078, .084, .093 in mild steel for street use and .093 or .120 in stainless steel for competition use. These are made for us by one of the top diesel shops in the US and fit well. Covered by a 1-year warranty for defects.
CHOOSING A LINE ID GUIDELINES. Your pump builder can help you pick the best line size for your set up/goals.
.078 lines are for stock HP range
.084 are good middle of the road size
.093 lines are typically for 800 HP and up. Offered in mild steel and stainless steel**
.120 lines are for race applications only, and only come in Stainless Steel.**
**Note: Stainless Steel Injection Lines are not recommended for daily drivers due to engine vibration and brittleness. Intended for trailered race trucks or show trucks.
NOTE: You will need a special RISER/SPACER or our Tunnel Ram Intake Plate for the lines to fit around/above your intake Horn, or a custom intake horn.
INSTALL NOTE: When installing line #1 hand bend/tweak the line if needed so everything butts up flat BEFORE the nuts are on.