 |
 |
 |
|
SXE FMW 2nd Gen Fit 63/73.4/.83AR Long T4 Gated is a
step towards a performance turbo.The 73.4mm turbine wheel will flow a
lot of air and keep drive pressure low. More suitable for
performance,and high rpm fun than towing and daily driving.The SXE is built on the latest technologies from Borg Warner
AirWerks® SX-E.
This turbo will support a maximum of 575-625HP
depending on elevation, turbine choice engine modifications. It flows
approximately 78 lbs/minute. By comparison the stock HX35w turbo flows
about 52lbs/minute and will support about 325HP on a 94-02.
Injector recommendations for a 1998.5-2002 with a big programmer would be 175HP- 225HP
Injector recommendations for a 1994-1998 would be 5x.012, 5x.013, 6x.011, 7x.010, 7x.011
Injector recommendations for a 1989-1993 would be 5x.012, 5x.013, 5x.014, 6x.011, 7x.010, 7x.01
Items Needed for Install:
• HX40 4" Downpipe
• HX40 Clamp
• 4" Turbo Back Exhaust
• 1989-1993 will need to purchase a new oil inlet fitting or a new top oil line (recommended)
• (Recommended) Flexible Oil Drain Line for Easier Installation
Accessories Included:
• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold Gasket
|
|
|
 |
|
 |
|